How-to adjust hold-open on an Impressions Storm Door.

Follow our helpful process here to successfully adjust the hold-open on your Impressions Storm Door.


Time Required: Icon_Time1_5m_10m_85gray-1 Difficulty: Icon_DiffLevel1_85gray-1

Tools Required

  1. Allen wrench Icon_AllenWrenchSet_85gray-1


Step 1) Locate slider

ImpressionsAdjustHoldOpenStep1If the storm door on your Impressions system swings open a bit too far, you can easily adjust it. Locate the slider pad in the drip cap.


Step 2) Loosen set screw

ImpressionsAdjustHoldOpenStep2Use the provided Allen wrench to loosen the set screw closest to the hinge side.


Step 3) Move pad

ImpressionsAdjustHoldOpenStep3Move the pads toward the handle side until you reach the desired hold open position. Do not move the pad toward the hinge side beyond its original position.


Step 4) Tighten set screw

ImpressionsAdjustHoldOpenStep4Once you've adjusted your opening, then tighten the set screw. Adjustment is now complete.